MikroTik Certified Routing Engineer is an advanced certification that covers different aspects of routing, relevant to larger networks and ISPs, with focus on OSPF with single and multiple areas, Policy Routing, and advance use of static routing. MTCRE Exam also covers the configuration of multi-homed devices, for Load Balancing and Failover. MTCRE is a requirement for the third level certification – MTCINE, MTCSE


Valid MTCNA Certificate Number.

What is the target audience?

  • This course is intended for anyone interested in learning MikroTik routing.
  • ISP Owner / Network Engineer
  • Network Consultant
  • Anyone who want to build the carrier in networking

By the end of this training session, the student will be familiar with routing . He will also be able to configure link redundancy (load balancing, failover), policy routing, vlan and tunneling.



Section 1: Routing Overview

  • What is router and routing
  • When we use routing?
  • Routing Information Base (RIB)
  • Forwarding Information Base (FIB)
  • Routing decision
  • The different between static route and dynamic route
  • The different between Interior and Exterior Gateway Protocol

Section 2: Static Routing

  • destination-address
  • gateway and check gateway
  • distance
  • scope and target scope
  • Creating routes
  • Setting default route
  • Implementing static routing on simple network
  • Types of load balancing in MikroTik
  • Load balancing Equal Cost Multiple Path (ECMP)
  • Administrative Distance
  • Check Gateway implementation
  1. Mangle routing mark
  2. Push specific traffic through one specific gateway
  • Scope and target scope
  • Recursive nexthope lookup

Section 3: OSPF

  • What is OSPF
  • How OSPF protocol works
  • OSPF Area (backbone, NSSA, Stub)
  • DR, BDR
  • Redistribute
  • AS Type-1
  • AS Type-2
  • Point to Point
  • Bradcast
  • Point to Multi Point
  • NBMA
  • Passive Interface
  • OSPF authentication methods
  • OSPF Virtual Link
  • Extended backbone area
  • Dijkstra Algorithm
  • OSPF load balancing
  • OSPF fail over
  • Filtering Prefix
  • Change route parameters

Section 4: MikroTik VLAN

  • 802.1Q
  • QinQ
  • Create VLAN in RouterOS

Section 5: VPN

  • Site to Site layer 2 tunnel
  • PPP Tunnel
  • PPTP Tunnel
  • L2TP Tunnel
  • PPPOE Tunnel
  • Using /32 IP address for tunnel

Section 6: Mesh Made Easy (MME)

  • Quick introduction of MME as an alternative to OSPF over wireless network


MikroTik Official Online Exam

  • On the last day of the training there will be an online exam of 60 minutes. (25 questions each.)
  • The passing grade is 60%, if you pass the exam your certificate will be immediately available in your MikroTik account (PDF format)
  • For those who score between 50-59%, will get a second chance. (Free of cost and the same day).
  • Please try the example test in your account to get a better picture about the online exam.